2014 Ford Transit Connect Glove Box Hinge Pin - image

Files (1)

TransitGloveBoxHingePinB.stl

STL

236.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
TransitGloveBoxHingePinB.stl	Primary model	236.5 KB STL	Slice file	Slice file	Slice file	Print in the upright position as recommended

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

2014 Ford Transit Connect Glove Box Hinge Pin

0 downloads34 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

You take the glove box out to access the cabin air filter, thus an opportunity, though you really need to try, to lose the hinge pin. And so I present to you a replacement. It doesn't have the tooth that snaps it in, but I think if it is a snug fit, it should stay in place. You may want to try 101% to make it snug. Mine was more of a slide fit. Print it in the upright position.