2016-2017 Subaru Crosstek seat handle - image

Files (1)

Handle.stl

STL

95.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Handle.stl	Primary model	95.2 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Handles

2016-2017 Subaru Crosstek seat handle

0 downloads54 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I made this for a friend. Their seat adjusting handle just cracked and broke off. I made it solid not hollow on the back side. I also made it so you can add the cover, but I told them to just put a small thing of hot glue. It is a bit deeper than the original so it is not so close to the seat. This part is $40 at the dealer.