Subaru Forester SG (2002 - 8) door release lever screw cover. - image

Files (1)

Cover.stl

STL

88.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 40%	100% solid	Recommendation
Cover.stl	Cover / cap	88.0 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Handles

Subaru Forester SG (2002 - 8) door release lever screw cover.

1 downloads58 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Lost one of my screw head covers from the door release handle of my Subaru Forest (2004). Designed this to replace, fits well, if needed use a lighter etc to soften the prongs and gently tease outwards slightly to get a better fit (secure clip). Be careful as they are delicate. Print a few at a time to give yourself spares, and also keep the print head moving allowing the tiny clips to cool between layers. Print in ABS (might be ok in PLA, just be super careful with the prongs!).