2016 Mazda CX-5 Wireless Phone Charger + Android Auto - image

Files (3)

car_wireless_holder_v2-Cut.stl

STL

200.1 KB

tab_car_wireless_holder.stl

STL

54.7 KB

car_wireless_holder-Body.stl

STL

152.0 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg ASA / ABS

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	ASA / ABS 20%	ASA / ABS 25%	100% solid	Recommendation
car_wireless_holder_v2-Cut.stl	Mount / bracket	200.1 KB STL	Slice file	Slice file	Slice file	Ensure proper ventilation to avoid overheating during printing and use
tab_car_wireless_holder.stl	Mount / bracket	54.7 KB STL	Slice file	Slice file	Slice file	Ensure proper ventilation to avoid overheating during printing and use
car_wireless_holder-Body.stl	Mount / bracket	152.0 KB STL	Slice file	Slice file	Slice file	Ensure proper ventilation to avoid overheating during printing and use

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

2016 Mazda CX-5 Wireless Phone Charger + Android Auto

0 downloads272 views0 likes

Shared by

Michael Chen

Verified

Description

I didn't see any wireless charging solutions for the 2016 CX5, so I decided to make one. This was done with the Anker 313 Wireless Charger (https://a.co/d/3LgKjG2) and the Motorola MA1 (https://a.co/d/3tF0vrG) for Android Auto. Something to note: in my testing I was not able to charge wirelessly while running wireless android auto because my phone kept overheating so your mileage may vary. I suggest printing in ASA / ABS to avoid warping due to heat. ASA has worked well for me so far this summer.