Files (4)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Clamps.stl | Printable file | 41.7 KB STL | Slice file | Slice file | Slice file | Use a brim or raft for the Pad.stl to prevent warping |
| Main_Bracket.stl | Mount / bracket | 184.3 KB STL | Slice file | Slice file | Slice file | Use a brim or raft for the Pad.stl to prevent warping |
| Mount.stl | Mount / bracket | 341.9 KB STL | Slice file | Slice file | Slice file | Use a brim or raft for the Pad.stl to prevent warping |
| Pad.stl | Printable file | 1.3 MB STL | Slice file | Slice file | Slice file | Use a brim or raft for the Pad.stl to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
2017 Ford Focus ST Rear Seat Monitor Headrest Mounts
Shared by
3DPrintedCarPartDescription
Bit of a random one, created for own use, but thought I would upload it anyway. The brackets that came with our Lenco DVP-939 were really unsuited to our car, so I created something custom to fit. The main parts are ABS in my case, the pad is printed in TPE to try and cause some flexibilty and friction to the TVs. Needs 8x M5 Cap heads, and a 100mm long bit of M6 threaded rod with 2 nuts.
Compatible Cars
Originally published on thingiverse.com by Joseph Dawber (ta5jda) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
