Files (1)

Clutch_Stop.STL

STL

21.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Clutch_Stop.STL	Primary model	21.4 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

2017 VW GTI Clutch Stop

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a clutch stop for a 2017 MK7 GTI. It makes it so the clutch pedal doesn't have to travel as far down. There is a lot of dead space for the clutch to move. Car still starts and shifts with no issues. Installation is easy. Just remove the rubber grommet under clutch, place the grommet in the 3d printed clutch stop. Insert Christmas tree clip. Then push in the hole and your done. I put a little bit of light foam padding in so that it would fit up a little better. The only thing you need to source for yourself is the push rivet. I just happen to have some samples lying around.