Files (1)

CD_Version.stl

STL

97.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
CD_Version.stl	Primary model	97.0 KB STL	Slice file	Slice file	Slice file	Scale the model in your slicer to fit different phone sizes by adjusting the X and Y scale ratios.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

2018 Ford Escape Phone Holder

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a phone holder for an IPhone 6, although it can be scaled in slicer to accomodate any phone simply by changing the X & Y scale ratios. This 3D model is designed for a phone case 0.5" thick and 5.7" long. I designed this specifically for my 2018 Ford Escape, but I am sure it will probably fit in many different cars. The slant inward into CD is 30 degrees from horizontal on the Escape.