Phone Mount Ford Escape 2008-11 (ball mount) - image

Files (1)

escape-mount-vfin.stl

STL

115.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ABS 20%	PETG / ABS 25%	100% solid	Recommendation
escape-mount-vfin.stl	Cover / cap	115.9 KB STL	Slice file	Slice file	Slice file	Use PETG / ABS; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Phone Mount Ford Escape 2008-11 (ball mount)

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a simple phone mount for the Ford Escape. Not exactly sure what all years this fits, mine is a 2011, so compare the pic to your car. I didn't want a high mount holder, or one that blocks a vent so i made this. It uses a screw to mount it to the console, so you'll need to drill a hole in the console, but hey, it's a 10 year old SUV so who cares. Print it with ABS or PETG as PLA will probably droop in the sun. Works with a ball-mount phone holder (not included).