Files (6)

2018_F-150_1-2_Switch_Plate.stl

STL

115.8 KB

2018_F-150_11-16_Switch_Plate.stl

STL

188.4 KB

2018_F-150_13-16_Switch_Plate.stl

STL

224.4 KB

2018_F-150_3-4_Switch_Plate.stl

STL

136.6 KB

2018_F-150_5-8_Switch_Plate.stl

STL

176.6 KB

2018_F-150_9-16_Switch_Plate.stl

STL

186.8 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

6 model files

Typical selected file

17g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.41

Filament only at roughly $24/kg PETG / ASA

Print time

29m–49m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
2018_F-150_1-2_Switch_Plate.stl	Printable file	115.8 KB STL	13g $0.31	14g $0.33	30g $0.73	Ensure proper fit by selecting the correct switch stem diameter file
2018_F-150_11-16_Switch_Plate.stl	Printable file	188.4 KB STL	15g $0.36	16g $0.39	36g $0.85	Ensure proper fit by selecting the correct switch stem diameter file
2018_F-150_13-16_Switch_Plate.stl	Printable file	224.4 KB STL	16g $0.38	17g $0.41	38g $0.91	Ensure proper fit by selecting the correct switch stem diameter file
2018_F-150_3-4_Switch_Plate.stl	Printable file	136.6 KB STL	13g $0.32	15g $0.35	32g $0.77	Ensure proper fit by selecting the correct switch stem diameter file
2018_F-150_5-8_Switch_Plate.stl	Printable file	176.6 KB STL	15g $0.35	16g $0.38	35g $0.84	Ensure proper fit by selecting the correct switch stem diameter file
2018_F-150_9-16_Switch_Plate.stl	Printable file	186.8 KB STL	15g $0.36	16g $0.39	35g $0.85	Ensure proper fit by selecting the correct switch stem diameter file

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

2018 Ford F-150 Switch Plate

0 downloads44 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I needed to have a switch added to my 2018 Ford F150 truck and did not want the installer to drill a hole in the plastic panel below the steering wheel. My 2WD truck came with a plastic coin holder in the space where a 4x4 selector switch would normally be if you had the 4x4 drive train. I was able to pull the coin holder out quite easily. I designed a switch plate that will be held in by double sided foam tape (3M). I have included plates for switch stem diameters of 1/2", 9/16", 5/8",11/16". 3/4", and 13/16". Sanded, spray painted with plastic primer, then final coats of flat black. It is working well. I might re-design it to be a bit thicker so that I can counter sink a couple of screws to use with some automotive slide on clip nuts instead of the tape.

Compatible Cars

2018 Ford F 150

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Kevin Graff (u04601) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.