2019+ Chevy Silverado Stake Hole Pocket Covers - image

Files (2)

2019+_Chevy_Stake_Pocket_Left.stl

STL

1.6 MB

2019+_Chevy_Stake_Pocket_Right.stl

STL

1.6 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Typical selected file

38g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.90

Filament only at roughly $24/kg PETG / ASA

Print time

1.1h–1.8h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
2019+_Chevy_Stake_Pocket_Left.stl	Choose left variant	1.6 MB STL	35g $0.83	38g $0.90	82g $1.97	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
2019+_Chevy_Stake_Pocket_Right.stl	Choose right variant	1.6 MB STL	35g $0.83	38g $0.90	82g $1.97	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

2019+ Chevy Silverado Stake Hole Pocket Covers

2 downloads136 views0 likes

Shared by

Alfred

Verified

Description

Designed up this stake pocket hole filler to fill the rear holes in the 2019 Chevy truck I just received as a work truck. We just removed the cap that was installed by the dealer. The front pockets had covers but the rear didn't. I tried the 2 prints that I found on thingiverse but they didn't fit the new body style.