2019+ Sierra / Silverado Round Frame Caps - image

Files (1)

2019+GMC_Caps_Round.obj

OBJ

50.2 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

22g

Based on 90% main infill across listed model files

Material cost

$0.54

Filament only at roughly $24/kg ASA / ABS

Print time

38m–1.1h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	ASA / ABS 20%	ASA / ABS 90%	100% solid	Recommendation
2019+GMC_Caps_Round.obj	Cover / cap	50.2 KB OBJ	10g $0.24	22g $0.54	24g $0.58	Use ASA / ABS; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

2019+ Sierra / Silverado Round Frame Caps

6 downloads682 views0 likes

Need this part printed?

Tell us what you need and we'll help you get it 3D printed. Takes a minute — no account needed and no payment is collected.

Request print / quote

Opens a quick request form. No order is placed and no payment is collected. Prefer email? Email us instead.

Shared by

Alfred

Verified

Description

Here is a base model for rear wheel well frame hole cover. This will it late model 2019, All 2020, All 2021 and 2022LTD models. Super tight fit so may need some tweaking depending on corrosion level. 100% Infill, did.3mm to speed up print time and still turned out fine. I was using PLA+, but ABS is probably recommended if available.