2019+ Ford Ranger 12v Socket OME TBC Adapter - image

Files (1)

Trailer_Brake_Socket.stl

STL

474.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Trailer_Brake_Socket.stl	Primary model	474.5 KB STL	Slice file	Slice file	Slice file	Print with the face on the build plate for a smooth surface finish.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

2019+ Ford Ranger 12v Socket OME TBC Adapter

0 downloads34 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This allows you to install the control knob for the OEM TBC in one of the 12V socket spots. There is a cap you can buy online but why do that if you can print it? I left it blank, you can go into the F360 file to enable the text with a negative extrude. But I didn't have luck getting the print to turn out well. I printed it with the face on the build plate for that smooth squish surface finish.