Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| XRS_UHF_Mic_Wedge_for_Jimny_Rev_D_-_Full.stl | Primary model | 38.6 KB STL | 10g $0.23 | 10g $0.25 | 23g $0.54 | Ensure a strong adhesion to the print bed to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
2019 Suzuki Jimny switch panel 'wedge'
Shared by
3DPrintedCarPartDescription
I created this little 'wedge' shaped block for the 2019 Suzuki Jimny so I could mount a GME XRS370C UHF radio microphone on the centre console. It continues on the panel shape of the switch bank and gives a place to mount the microphone magnetic clip. I used double sided tape to stick it in place.
Compatible Cars
Originally published on thingiverse.com by Aar Gee (meaargee) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
