Files (3)

Suzuki_Logo.stl

STL

12.0 KB

Suzuki_Swift_Center_Console_Cover.stl

STL

108.1 KB

Suzuki_Swift_Center_Console_CoverNOLOGO.stl

STL

96.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Suzuki_Logo.stl	Accessory piece	12.0 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Suzuki_Swift_Center_Console_Cover.stl	Cover / cap	108.1 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Suzuki_Swift_Center_Console_CoverNOLOGO.stl	Cover / cap	96.0 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

Suzuki Swift Center Console Cap

0 downloads33 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Designed a simple little cover for the center cup holder in a Suzuki Swift. I like to keep my change in this spot and wanted to have some form of lid over the top. Fits nicely in the cup holder and is easy to remove. In the future I want to make a hinged version for easier access. Printed the main piece in grey ABS and the Suzuki logo in black PLA. (I'm not well versed in ABS, hence the horrible overhangs for the logo). Would probably be fine to do both in PLA, I just wanted to try and match the grey colour of the console (but I failed anyway). I have also included a version with no logo indent. Printed on a Creality Ender 3 V2. [UPDATE] I didn't realise the logo was backward until a friend pointed it out... Woops. Have since reuploaded with the correct orientation.