2020 Toyota Tacoma Sound System Knob Ring - image

Files (1)

knurl_Ring_2020_Taco-21.5diameterX6.5high.stl

STL

204.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / TPU 20%	PETG / TPU 25%	100% solid	Recommendation
knurl_Ring_2020_Taco-21.5diameterX6.5high.stl	Primary model	204.3 KB STL	Slice file	Slice file	Slice file	Ensure a snug fit by verifying dimensions before printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

2020 Toyota Tacoma Sound System Knob Ring

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a remix of JBinFL's excellent 2020 Toyota Tacoma Radio Knob enhancement. That print is designed for PETG. I only had TPU and JBinFL's model was a little loose and narrow using that material. This remix has an inside diameter of about 18mm and a height of 6.5mm and is a nice snug fit on my 2020 Tacoma.