Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| 04_toyota_tacoma_hvac_knob.stl | Primary model | 781.4 KB STL | Slice file | Slice file | Slice file | Ensure a clean and level print bed for optimal adhesion |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
04 toyota tacoma hvac knob
Shared by
3DPrintedCarPartDescription
The only print issue i had was 1 or 2 popped off the bed very early. I ran the bed heat up to about 84 and then i slowed my speed down to 85 will printing the shaft and it stuck very well. I also cleaned bed with acetone. that may have been all that was needed but anyway that is what worked for me. Feel free to edit or remake file however you want.
Compatible Cars
Originally published on thingiverse.com by timothy spira (textbooktim) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
