Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| taco_KNOB.stl | Primary model | 478.1 KB STL | 21g $0.50 | 23g $0.54 | 50g $1.19 | Ensure proper orientation for optimal print quality and minimal supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Toyota Tacoma Radio Volume Tuner Knobs
Shared by
3DPrintedCarPartDescription
This fits the Entune Premium head unit. Fits both Volume and Tuner knobs. I'll upload installed photos later. They work really well and allow much easier manipulation of the knob compared to the super slick, and small diameter factory knobs. I used PLA, but after a hot summer they aren't as snug as they were to start (but still work well enough to not bother making new ones using abs or petg) They're the right size to modify the model to apply a small image or design to the face. I included the IPT in case there are any Inventor users out there.
Compatible Cars
Originally published on thingiverse.com by Justin Seidita (seidita84t) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
