Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| 240zAlternatorBracketHoseProtectorv2.stl | Mount / bracket | 44.6 KB STL | Slice file | Slice file | Slice file | Ensure proper fit over the alternator bracket by checking dimensions before printing |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
240z Alternator Bracket Cover
Shared by
3DPrintedCarPartDescription
This is meant to slip over the top of the alternator bracket on the L-series engine. The radiator hose can end up very close to or touching the bracket depending on which bracket and alternator you're using. Some shortening may be required, cutting along the layers with a razor worked for a friend, or if you know the length you need you could stop the print at that height. v2- Now with clipping action!
Compatible Cars
Originally published on thingiverse.com by Jordan (h3lpless) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
