Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

2cv headlight cap

0 downloads47 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Headlight cap for a 2cv or 2cv kitcar. There a 3 versions A short one A large one (full circle, first print test ring stl for size) And a large one with text. Please print the test ring, and make sure this fits before printing. So you can make scaling adjustments if necessary. Mine needed a 1.01 scaling adjustment on one off my printers. You need to cut out the part where the glass clamp is located. Use a little grinder to make it fit. If the headlight cap fits snug, use a black sealant to glue the cap on to the glass.