Files (2)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Cerato2din_mount_LH.stl | Mount / bracket | 129.1 KB STL | 13g $0.32 | 14g $0.35 | 32g $0.76 | Ensure proper orientation in the slicer for optimal printing |
| Cerato2din_mount_RH.stl | Mount / bracket | 129.1 KB STL | 13g $0.32 | 14g $0.35 | 32g $0.76 | Ensure proper orientation in the slicer for optimal printing |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
2DIN car audio unit mount for Kia Cerato LD/TD (Spectra5)
Shared by
3DPrintedCarPartDescription
Mounting L-bars for a 2DIN-sized car stereo unit to Kia Cerato LD/TD (1st generation) also known as Spectra5. May also fit some other Kia / Hyundai car models. The mounting is designed for a Chinese Android-based head unit (like one on the picture), which had a "brim", slightly larger than the face panel. Sizes of the mounting are chosen for the "brim" to stay behind the car console, while the front panel to stick out from it. So it may not fit head units of other sizes. Be wise choosing a material for printing car parts. PLA does not fit for it and can be easily deformed on a heat. PETG is good and strong enough. The frame, which appears on the final photo, is another thing
Originally published on thingiverse.com by Dmitry Pogrebnyak (AterLux) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
