3.5 EcoBoost front crankshaft seal installer - image

Files (1)

Ecoboost_Front_Crank_Seal_Installer.stl

STL

329.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Ecoboost_Front_Crank_Seal_Installer.stl	Primary model	329.6 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tools & Jigs

3.5 EcoBoost front crankshaft seal installer

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Front crankshaft seal installer for the 3.5L ecoboost engine. May fit other engines. I am using the Blupoint master harmonic balancer installer kit to aid in installation. A rubber mallet could also be used lightly. The seal goes in easily. I printed in PLA but can be made of stronger plastics like ABS or Nylon. The correct depth to position the seal is built in. When the slightest resistance is felt when installing, stop. The tool is made of plastic and can break.