Files (2)

drainplugtool-long.stl

STL

59.1 KB

drainplugtool.stl

STL

59.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
drainplugtool-long.stl	Printable file	59.1 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for stability if necessary
drainplugtool.stl	Printable file	59.5 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for stability if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tools & Jigs

Ford F150 Drain Plug Tool

0 downloads82 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Drain plug tool for F150. Anyone who have ever changed oil on a F150 5.0 knows it can make a mess. When the plug is removed to oil stream hits the sway-bar and makes a nice 180 deg spray pattern. Not sure if this is a 5.0 only issue. This tool fits the plug and allows it to be loosened with a 16mm wrench. When loosened, the tool rests against the transmission cooler and thereby limits the flow rate. The short version limits it to the point that it will still hit the sway bar, but not to the point it sprays in a 180 deg pattern. Been tested and works as intended. I made a longer version that will limit the flow rate even more. Have not tested this version.