← Back to Browse Parts
Print guidance estimate
Estimated from part metadata
Print cost & setup estimate
Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.
0 model files
Recommended kit
—
Based on 60% main infill across listed model files
Material cost
$0.00
Filament only at roughly $24/kg PETG / ASA
Print time
—–—
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 60% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tools & Jigs
Ford F-150 Front Crank Seal Installer 35 Ecoboost
0 downloads37 views0 likes
Shared by
3DPrintedCarPartVerified
Description
Measurements taken off of the official Ford front crank seal installer. Printed with PLA+ 100% infill.
Compatible Cars
Published Jun 29, 2026Updated Jul 15, 2026
Originally published on thingiverse.com by Dominic Marc (PlastikSpork) · License: CC BY-NC
Verified by drivers
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Loading fitment proof…
Sign in to share fitment proof, installed photos, and material notes.
Comments (0)
Part lists
Save this part to named public or private collections. Public lists can be shown on this part page.
Related Parts
Finding specific fitment/category matches first.
