Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ford F150 F250 F350 Rear Seat Latch Puller
Shared by
3DPrintedCarPartDescription
Ford engineers in their infinite wisdom decided that a 5mm long steel pin wedged between a gap the size of a picture frame was a great design. This finger ring puller allows you to reach for the pin with ease and pull the pin. Fits in between the pin and the bracket against the wall. Just make sure you are able to lock the back seat to the wall. Tested on Ford F-150 2009 to 2014. Should fit a 2015-2020. Same Part Number. There are 2 versions. The 20mm diameter finger hole and 17mm diameter finger hole. They both work well. Instructions: DISCLAIMER: BY PRINTING AND USING THIS PRODUCT YOU AGREE TO NOT HOLD ME RESPONSIBLE OR LIABLE FOR ANY INJURY, DEATH OR DAMAGES. USE AT YOUR OWN RISK.
Compatible Cars
Originally published on thingiverse.com by S M (SM_Prototyping) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
