Files (4)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Map_Sensor_Mount.STL | Mount / bracket | 158.2 KB STL | 14g $0.34 | 15g $0.37 | 34g $0.81 | Ensure proper orientation in slicer for optimal printing |
| m6x1nut.STL | Printable file | 337.9 KB STL | 18g $0.44 | 20g $0.48 | 44g $1.05 | Ensure proper orientation in slicer for optimal printing |
| m6x1x30mm.STL | Printable file | 1.2 MB STL | 31g $0.74 | 33g $0.80 | 73g $1.76 | Ensure proper orientation in slicer for optimal printing |
| m6x1x35mm.STL | Printable file | 1.4 MB STL | 32g $0.78 | 35g $0.85 | 77g $1.86 | Ensure proper orientation in slicer for optimal printing |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
3 Bar MAP Sensor Mount for Turbo Dodge/Chrysler/Plymouth/Mopar
Shared by
3DPrintedCarPartDescription
This is a 3 bar map sensor mount for 80's and 90's turbo mopars. Its designed to work with a gm style sensor. Print in a high temp material for longevity in your engine bay. A normal bolt can be used for mounting the solenoid and I have also included a printable bolt. The printed bolt may be delicate, so if you choose to go that route, be cautious while threading the nut. I have also included bolt files to mount the sensor. This comes pretty close to touching the hood of my TC, so I have included the cad file, in case you need to remix it. I think this will fit most of the other dodges though.
Compatible Cars
Originally published on thingiverse.com by Jared Rodriguez (jrod1231) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
