3000GT Neon Climate Control Button Stand Offs - image

Files (1)

Neon_Climate_Control_Button_Stand_Offs.stl

STL

90.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Neon_Climate_Control_Button_Stand_Offs.stl	Primary model	90.7 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

3000GT Neon Climate Control Button Stand Offs

0 downloads80 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Extension pins exist in the neon climate control unit in the 3000GT and Dodge Stealth. These allow the buttons on the face to extend their reach out and contact the stock OEM button pads on the circuit board. Due to the fact that they are not captive at all, when service is done on the unit it is vastly easy to accidentally drop at least one of the 12 pins. Which are made of a plastic. Which bounce.... I lost a few. So here you go.