Files (4)

mistubishilogo_v2.stl

STL

1.8 KB

Shift_Knob_v1.stl

STL

239.8 KB

Shift_Knob_v2.stl

STL

328.4 KB

Shift_Knob_v2_Mitsubishi_Logo.stl

STL

483.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
mistubishilogo_v2.stl	Accessory piece	1.8 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Shift_Knob_v1.stl	Printable file	239.8 KB STL	Slice file	Slice file	Slice file	Ensure proper thread size (M10 1.25) for secure fitting
Shift_Knob_v2.stl	Printable file	328.4 KB STL	Slice file	Slice file	Slice file	Ensure proper thread size (M10 1.25) for secure fitting
Shift_Knob_v2_Mitsubishi_Logo.stl	Printable file	483.5 KB STL	Slice file	Slice file	Slice file	Ensure proper thread size (M10 1.25) for secure fitting

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

3000gt Shift Knob

0 downloads46 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is my first design. I thought the shift knob would be too weak printed in PLA but so far I've had nothing but success. Even banging through gears it feels very solid and there is no wobble at all. I have posted the original version and also a second v2 version that is a bit taller with an option for a flat top with a different color Mitsubishi logo. I used a rubber mallet and the logo pressed right in. I may upload other versions later. Any comments on improvements would be great. The threads are M10 1.25.