308 10 Round Magnetic Storage Box
Files (4)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
Michael ChenDescription
Storage for 10 rounds of 308 or similar cartridges with magnetic closure. The Slot in the front allows you to make labels for your custom loads or tear off the end of a box from factory ammo an insert it. Bullets are oriented down with a shelf that holds the neck to prevent any tip deformation. Magnets are 5/16 which may be sources from Harbor Freight or Amazon easily. As always use at your own risk, no warranty implied, and I ain't taking responsibility for nothing but the glory. Larger versions may be found in our Etsy store. Links listed below: 20 Round Version - https://pewpewpackout.etsy.com/listing/4455050538/308-20-round-magnetic-storage-box-stl 40 Round Version - https://pewpewpackout.etsy.com/listing/4455051948/308-40-round-magnetic-storage-box-stl When using 5% infill and 4 to 6 walls are all that are required to make a pretty beefy case.
Originally published on thingiverse.com · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Verified by drivers
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Comments (0)
Part lists
Ask the community about this part
Start a fitment, printing, or design discussion with this part already attached.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
