Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ABS 20%	PETG / ABS 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

350Z Catch Can Holder

0 downloads42 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Hi Everyone, This is my oil catch can holder/mount for my Nissan 350z, 2004 DE. This mounts the catch can to the engine strut brace. This mount will work with the Mishimoto 3 port compact catch can design and derivatives that are sold online. I have a video linked below on my personal YouTube channel which will help you in the install and position of the catch can, please give it a watch if you are interested. https://youtu.be/cBEYvvLAhiM As well below are some of the hardware you will need to buy Catch Can Mount M4 Nut x2 M4 ~140mm long Screw x2 M6 Nut x2 M6 250mm Length Torx Head bolt x2 Extras: Length of pipe (I used 10mm fuel line hosing) ~1m Hose clamps x6 I printed this latest one in ABS to withstand the engine bay temperatures. However I did run a PETG version for over a year, only became a little loose, but still worked great, so use what you like, though I doubt PLA would work...it might lol.