Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg ASA / ABS
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | ASA / ABS 20% | ASA / ABS 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| prototype_2.stl | Primary model | 76.3 KB STL | 46g $1.10 | 50g $1.20 | 110g $2.63 | Ensure the print bed is level and well-calibrated for a snug fit |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
3x 52mm The Triple Center Vent Guage Pod s13 240sx
Shared by
Michael ChenDescription
Print with ABS!! or any other material resistant to direct sunlight and heat, I had a good laugh when i left my prototype PLA one in the car for a day and came back to a warped monstrosity. I made this for the rest of the people in the world who share my love for 240's, I could not find any others for this exact spot aside from folks selling the same thing for some pretty high prices. This is not for you to print and sell online, print them for your friends and give them away! :). Anyway I hope you enjoy its a very snug fit ! This is my first try at using sketchup hope ya like it ! if you do make one for yourself , let me know how it goes throw me a like if it works out ! :) . I will be unable to really make anything else as I will be heading out for work very soon, but I will try to respond !
Print Settings
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
