4H/2H rotary selector guard for 2019-2021 Ford Ranger - image

Files (1)

4x4_guard_II.stl

STL

6.0 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
4x4_guard_II.stl	Primary model	6.0 MB STL	Slice file	Slice file	Slice file	Ensure the print bed is level for accurate attachment to the vehicle

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

4H/2H rotary selector guard for 2019-2021 Ford Ranger

0 downloads31 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a guard for the rotary knob that selects 2H, 4H, 4L on the 2019+ fifth generation Ford Ranger. Attach it with thin VHB double-faced tape. The legs are slightly different lengths to interface with the slightly tilted knob. Position the guard ring so that it is parallel to the top face of the selector knob.