Files (1)

4x6speakerBox.stl

STL

310.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
4x6speakerBox.stl	Primary model	310.3 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

4x6 speaker box mounting plate

0 downloads30 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a very simple and basic 4x6 inch speaker box / mount. I drew this for my '97 Jeep Wrangler TJ. I didn't draw additional holes to mount it to the jeep but the box fits just inside the mounting holes so screws hold it in place anyway. I also didn't draw a hole for the speaker wire, I just melted one with a hot bolt. This way you can make the hole whatever size you need and put it in the best place possible. Speaker mounting holes are 111 mm x 80 mm, I drew it forthe Rockford Fosgate Punch P1462.