5th Gen 4Runner Cupholder Sleeve - image

Files (1)

5th_Gen_4Runner_Cupholder_Sleeve.stl

STL

167.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
5th_Gen_4Runner_Cupholder_Sleeve.stl	Mount / bracket	167.6 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used if necessary for adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

5th Gen 4Runner Cupholder Sleeve

0 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Anyone who has a 5th gen Toyota 4Runner knows about the center console cupholders. I made an adapter to fit the rear cupholder, it's the right size for a 15.5oz Monster can. If you would like to make your own, the dimensions are 3.75" at the top, 3.5" at the bottom, 2.822" tall with an inner diameter of 2.65". I radiused the inner hole to allow for easier insertion while driving, I've never had a problem with mine. Hope everyone enjoys!