Files (1)

7__headlight_cover_1.stl

STL

453.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
7__headlight_cover_1.stl	Cover / cap	453.8 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

7" Headlight Cover

0 downloads34 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Headlight cover designed to press fit over the retaining ring of a NA Mazda Miata headlight. No clips and can be easy popped off of the headlight. PLEASE NOTE: I designed this to go over a Hella H4 conversion housing which is less convex than the stock H6024 sealed beam bulb. I believe it does not fit over the stock bulb.