Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 35% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Mazda MX5 - Fiat 500 side repeater bezel
Shared by
3DPrintedCarPartDescription
Designed to allow installation of Fiat 500 side indicator repeater units. Fits NA, NB, NC. May also fit other cars as long as the studs on the indicator unit will fit through the original side repeater hole and the bezel is large enough to cover any holes in the wing. I suggest printing the rear holder as a solid in ABS. In an ideal world I would turn the outer bezel from aluminium or stainless steel but a solid 3D print would work too. You will need to unbolt the arch liner to access behind for the nuts. Install with the dimples on the rear holder facing towards the bezel. They have been designed to apply the clamping load over a small surface area to reduce the chance of slippage. If you like this please use the "Tip the designer" button just over there ---> somewhere. Many thanks Nick - Skuzzle.
Compatible Cars
Originally published on thingiverse.com by Nick Bailey (Skuzzle) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
