Files (2)

Shifter_Main_body_front.stl

STL

1.6 MB

Shifter_Main_body_rear.stl

STL

877.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 10%	100% solid	Recommendation
Shifter_Main_body_front.stl	Printable file	1.6 MB STL	Slice file	Slice file	Slice file	Check and adjust orientation in slicer for optimal support generation
Shifter_Main_body_rear.stl	Printable file	877.6 KB STL	Slice file	Slice file	Slice file	Check and adjust orientation in slicer for optimal support generation

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

90's Subaru shift knob

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Printed for late 90's subaru shifter, with some minor modification it could be retooled for another shifter. Both sides will attach with m4 and m5 hardware. Designed for and printed with ABS, your shrink rate may vary. 3 perimeters, medium infill, you will want to use supports for the front. May need to tape your shifter threading, depending on its diameter.