Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| jeepindicator-90716.stl | Primary model | 466.2 KB STL | Slice file | Slice file | Slice file | Ensure proper adhesion to the print bed to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
'97-'06 Jeep Automatic Shift Indicator Lower Bracket
Shared by
3DPrintedCarPartDescription
This is a replacement for the bottom of the Indicator Assembly on a TJ Jeep Wrangler with an automatic. The holes that are molded in the top cover bosses are too large for the #6 screws as molded. Fill these bosses with epoxy, let cure & drill them out with a 1/8" bit. After which you can mount this printed bottom to the top bezel with #6 x 1/2" thread forming screws. Note: if your bottom posts broke off inside the bosses like mine did, you may have to drill out the broken bottom posts that are left inside the bosses first, then fill bosses with epoxy.
Compatible Cars
Originally published on thingiverse.com by Bill Dusinberre (dusin1) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
