Adapter 7 inch touchscreen 350z satnav - image

Files (1)

Screen-interface.stl

STL

123.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 10%	100% solid	Recommendation
Screen-interface.stl	Primary model	123.5 KB STL	Slice file	Slice file	Slice file	Use M3 screws for assembly

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Adapter 7 inch touchscreen 350z Sat Nav

0 downloads46 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I create an interface to adapt a Raspberry Pi and a 7 inch touchscreen in the stock satnav of Nissan 350z. (see this Reddit post) This interface hold the touchscreen to the metal case of the satnav. You will need some M3 screws to bolt everything on. For the print settings, I just used the standard 0,2mm / 20% infill setting of Cura.