Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Adapter to fit the 6 Speed Allison Automatic Transmission to the Toyota Engine 22RE
Shared by
3DPrintedCarPartDescription
This is an adapter to fit my 6 Speed Allison Automatic Transmission (http://www.thingiverse.com/thing:1094616) to the Toyota 4 Cylinder Engine 22RE made by ericthepoolboy (http://www.thingiverse.com/thing:644933). My automatic transmission wasn't really made for this engine, but as some of you might now "ericthepoolboy" made an awesome working model of that engine and the manual transmission for it, and I thought that the people that printed that engine could print also my automatic transmission as an optional add-on. Is at the original scale and is easily swappable so you can change from manual to automatic transmission very quickly and without modifying anything to their existing engine nor transmission. This adapter screws on the case of the automatic transmission, with the front cover in the middle, so you need 9 screws with 10mm long, 1.5mm of diameter. After that, all you have to do is screw the bell housing to the adapter using the same screws you use to secure the manual transmission.
Compatible Cars
Originally published on thingiverse.com by Interlink Knight (InterlinkKnight) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
