Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Addon for Tesla Model 3 Wheel Center Cap - T-Logo split

0 downloads23 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

You need the CapBody.stl from here => https://www.thingiverse.com/thing:3328809 This is an experiment to make it easier to remove the cap without removing the wheel. Press on the T. The T is falling in the hub of the rim. Then you can use your fingers or any other tool to pull the cap off. That's the theory;-).