Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Tesla Model 3 Wheel Center Cap 4xT-Logo

0 downloads31 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Remix from 'Tesla Model 3 Wheel Center Cap' Diameter is 58 mm / 2,4 inches. Tolerance/space between CapBody and Logo. Depends on the accuracy of the 3D printer: Logo_0.25.stl => 0,25mm Logo_0.15.stl => 0,15mm.

Compatible Cars

Tesla Model 3

Published Jun 29, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Math (3DMath) · License: CC BY-NC

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.