Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Tesla_Wheel_Cap4.stl | Cover / cap | 1.4 MB STL | 32g $0.77 | 35g $0.83 | 76g $1.82 | Use PETG / ASA; check sealing faces and verify in slicer. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla Model 3 Wheel Center Cap
Shared by
3DPrintedCarPartDescription
Love Math's design but am to lazy to print all the bits and pieces for that final perfection so I combined the pieces into one, less perfect piece where a pause @ 21,2mm allows for a filament switch and a different colour for the logo itself.
Compatible Cars
Originally published on thingiverse.com by Carsten Cremer (CarstenMakerBot) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
