Files (2)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Sealing_case_for_8039_Intake_Design_2nd_print_for_fail_remake.STL | Printable file | 108.9 KB STL | 14g $0.33 | 15g $0.36 | 33g $0.78 | Ensure proper sealing around the MAF sensor hole |
| 8039_intake_design_2.5.STL | Printable file | 1.1 MB STL | 32g $0.78 | 35g $0.84 | 77g $1.85 | Ensure proper sealing around the MAF sensor hole |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Air Intake For Acura TSX 09 and Others
Shared by
Michael ChenDescription
This is to replace the traditional airbox in an Acura TSX 90-13 models. It utilizes a series of large binder clips and the filter is a paper one made by Fram (8039). The hole in the side is for the MAF sensor and should seal relatively well. In theory, this setup should give the engine more air than the standard paper filter. I currently still use it, and it pretty nicely. -Place the filter onto the funnel mount. -Clip the binder clips around the edge of the funnel mount. Please note that this is a work in progress.
Print Settings
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
