AirPods Pro Wireless Charge Adapter for Tesla - image

Files (1)

Tesla_AirPods_Pro_Adapter.stl

STL

67.0 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

12g

Based on 25% main infill across listed model files

Material cost

$0.29

Filament only at roughly $24/kg PETG / ASA

Print time

20m–34m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Tesla_AirPods_Pro_Adapter.stl	Primary model	67.0 KB STL	11g $0.26	12g $0.29	26g $0.63	Ensure proper orientation in slicer for optimal support generation

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

AirPods Pro Wireless Charge Adapter for Tesla

0 downloads26 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a remix of the AirPods wireless adapter for Tesla wireless chargers by slyice (https://www.thingiverse.com/thing:3611401) with support for AirPods Pro. So I saw this print and wanted it, but thankfully noticed before printing that it wasn't sized for AirPods Pro per the comments. I spent many hours learning how to use tinkerCAD to import this and make the right changes. Without too much fanfare, I think I did a decent job. The side walls up top are a bit thinner and the base is potentially slightly too wide in my opinion, but I'll take it as is. Only the Tesla branded option is available here, sorry. I am printing it now and will hopefully add pictures afterwards. CURRENTLY: Working fixing the gap left at the base of the T with a box infill, and then after printing the first one, the adaptations adjusted the location and I need to adjust for the coil location. Currently it won't charge as is.