Alternative to BMW X5 E70 Jack Lift Pad - image

Files (1)

BMW_Jack_Foot_3D_Safe_v4.STL

STL

850.0 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
BMW_Jack_Foot_3D_Safe_v4.STL	Primary model	850.0 KB STL	46g $1.10	50g $1.20	110g $2.63	Ensure the print bed is level and clean for optimal adhesion.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

Alternative to BMW X5 E70 Jack Lift Pad

0 downloads216 views0 likes

Shared by

Michael Chen

Verified

Description

This design can be used as an alternative to a BMW X5 E70 Under Car Jack Support Pad. Often the genuine BMW ones fall and go missing. Included STL file is printable without support. 6mm Fly Screen Rubber Spline can be inserted into the top rectangular channel to provide the cushioning Printed using ABS Filament, the part weight was 127g at the following settings, This design does not resemble the original part.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

BMW (all models)

Published Mar 8, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.