Headlight replacement for BMW E36 - image

Files (1)

Headlight_Replacement_for_E36.STL

STL

134.3 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg ASA / PETG

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	ASA / PETG 20%	ASA / PETG 25%	100% solid	Recommendation
Headlight_Replacement_for_E36.STL	Primary model	134.3 MB STL	46g $1.10	50g $1.20	110g $2.63	Ensure proper ventilation when printing with ASA or PETG

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

Headlight replacement for BMW E36

1 downloads349 views0 likes

Shared by

Michael Chen

Verified

Description

I desinged this headlight funnel for my Racecar BMW E36. I constructed it with a scan of the orignal headlight, so the fitment is really nice. Made this just for fun, not for performance :) Make sure you don't use this on public roads. Only for Racetrack! It fits any facelift models of the BMW E36, exept the compact.