zaślepka_hujogenu.stl

STL

401.6 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
zaślepka_hujogenu.stl	Primary model	401.6 KB STL	46g $1.10	50g $1.20	110g $2.63	Ensure proper orientation for optimal strength and minimal supports.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

BMW E36 Fog Light Blank Plate

1 downloads307 views0 likes

Shared by

Verified

Description

I design this to mount with self tapping screw or drill hole and use zip ties.

Time: 2h

Filament: 50g

Supports: Not needed

Published Mar 12, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.