Files (1)

dolot_w_hujogenie-Body_Meshed.stl

STL

37.0 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
dolot_w_hujogenie-Body_Meshed.stl	Primary model	37.0 MB STL	46g $1.10	50g $1.20	110g $2.63	Ensure proper orientation in the slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

BMW E36 Fog Light Air Vent

12 downloads2.6K views0 likes

Need this part printed?

Tell us what you need and we'll help you get it 3D printed. Takes a minute — no account needed and no payment is collected.

Request print / quote

Opens a quick request form. No order is placed and no payment is collected. Prefer email? Email us instead.

Shared by

Michael Chen

Verified

Description

Air vent for BMW E36. It replace the fog light. May be used for brake cooling or for forcing cold air to filter. I designed this to mount it with self tapping screws or drill hole and use zip ties. If you want pair of them, simply mirror model on your slicer.