Files (1)

BiggerM3E36Drifterstl.stl

STL

117.4 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
BiggerM3E36Drifterstl.stl	Primary model	117.4 MB STL	46g $1.10	50g $1.20	110g $2.63	Ensure proper bed adhesion to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Exterior

BMW e36 M3 Dr!ft car

0 downloads183 views0 likes

Shared by

Michael Chen

Verified

Description

This beast was an ask from a friend, that owns an E36 Dr!ft car. I matched his wheels and spoilers for him. This is a compilation of multiple parts, gleaned from 3d modelling sites. FULL CREDITS go to the original creators. All I did was mash them together.