Files (3)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Ignition_lead_clip_2.stl | Clip | 242.8 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation for minimal supports |
| Ignition_lead_clip_3.stl | Clip | 280.1 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation for minimal supports |
| Ignition_lead_clip_45.stl | Clip | 310.7 KB STL | Slice file | Slice file | Slice file | Ensure proper orientation for minimal supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Aston Martin AMV8 ignition lead clip
Shared by
3DPrintedCarPartDescription
Clip for 2, 3 and 4 8mm ignition leads as fitted to 1970s Aston Martin AMV8s. Copies the original style but with larger holes for the modern 8mm leads as opposed to the older 6.35 and 7mm leads. Clips onto a rocker cover nut using a shallow taper within the loop part for 7/16" AF nuts. Drawn in OnShape using a publically accessible file Might work for other engines/leads, good luck!
Compatible Cars
Originally published on thingiverse.com by simon sd-industries (simon0362) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
